Saladax MyCare Insite Touch Screen Starter Manual page 4

If it is greyed out (inactive), tap on the
3)
of the screen. The switch is now ON (
Tap on Pair new device to
4)
enable a list that lists all
pairable devices in the
current location. Check the
serial number on the back
of the Analyser and select
the correct device from the
list.
Another dialog appears.
5)
Press Pair to pair
Analyser to Touch Screen.
Press the home button on
6)
the Touch Screen. The
launch screen appears, and
the application can be
started by pressing the
application icon.
A dialog appears showing the paired device. Tap device name to establish
7)
a connection.
After successfully connecting to the device the application shows the
8)
paired device's details. The Bluetooth connection is now established.
switch on the right side
) and will appear blue.
3/6 PI MCI-TS Rev 02