Normstahl SUPERIOR-TOF Manual page 3

Owner and user instructions:
About this instructions
All owners and users of the door must read, understand and obey the information and instructions in this
instructions. Failure to do so may result in damage to, or failure of the equipment, and possible injury to
persons.
1. Safety
1.1 General safety statements
The door has been designed to meet all operational and safety
requirements in the European Directives and the standards issued
by the European Standardization Committee, CEN.
1.2 Safety instructions
Only authorized persons are permitted to operate the door.
.
Read and fully understand the safety instructions before you operate or do maintenance on the door.
.
Always obey local health and safety regulations when you operate or do maintenance on the door.
.
Make sure there are no persons or equipment in the working area of the door before you operate the door.
.
Do not remove or immobilize safety equipment installed on or near the door.
.
Do not operate the door if it has any defects.
.
Do not modify the door. Unauthorized modification can cause danger to people and affect the function
and safety of the door.
.
If one of the safety devices has been activated, take the door out of operation and contact the dealer
immediately.
.
The door leaf is heavy. Keep your back straight when you pull the door upward.
.
Do not attempt to adjust or disassemble any part of the door, including the door cables, balancing system
and cable attachments.
.
Do not attempt to balance the door yourself. The forces in the system can cause serious personal injury.
.
Do not use the door leaf or the track set to support a ladder.
.
This door is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the door by a person responsible for their safety.
.
In case of an electrical operated door, activation of the manual release, may cause uncontrolled movement
of the driven part due to mechanical failures or an out-of-balance condition.
Mein Tor.