LAWO Power Core User Manual page 247

15. Power Core Max
15.1 Introduction
The Power Core Max software license allows Power Core to be controlled from up to four independent control
surfaces. The connected surfaces share the Power Core Max resources. They can be any permitted size and
layout as long as the total number of resources do not exceed those given in the Power Core Max license chart.
The system is similar to a split-frame surface but adds support for up to four independent Central Modules and
four independent VisTool instances. Each surface and VisTool is assigned an Access Group from 1 to 4. This
allows certain functions to be controlled independently so that the system can operate as four separate consoles.
A typical installation could look as follows.
Power Core User Manual Version: 6.6.0/3 247/539