Table of Contents
Advertisement
PYRAMID TIMETRAX BIO ETHERNET
OPTION 2: PC DOES NOT HAVE an available open Ethernet
port -or- other TimeTrax terminal is being directly
connected to your network. Connect the DC power supply (Fig. F)
to a standard wall power outlet (Fig. G) and to the TimeTrax terminal (Fig.
E). Connect the Cat5 Ethernet cable (Fig. B) to the TimeTrax terminal (Fig.
E). Connect the opposite end of the Cat5 cable to an Ethernet Hub (Fig. C).
Then connect one end of the Cat5 Ethernet Cable (Fig. D) to the Ethernet
Hub (Fig. C) and the opposite end to the back of your PC. (Fig. A)
*(1) Cat5 cable is included. Any additional Cat5 cables necessary for installation are not
included and must be purchased separately from any office supply reseller or computer store.
**Ethernet Hub (Fig. C) is not included with TimeTrax kit.
Please restart/reboot your PC before continuing
with the instructions.
TERMINAL MOUNTING
The Pyramid TimeTrax Bio is designed to sit on a desk, shelf or table. An
optional terminal wall bracket (item # 42158) can be purchased from the
supplier you bought the terminal from. You can also purchase the bracket
from Pyramid direct at www.ptitime.com or by calling (888) 479-7264.
LOGGING INTO THE SOFTWARE FOR THE FIRST TIME
If the recorder is connected correctly,
the Initial Communication Form will
appear with the message "Recorder
Found". If not, check your cable
connections as per the installation
diagram and click the ReConnect
button.
Double click the
Pyramid TimeTrax
ICON placed on your
desktop to begin
When the program is launched, you are
presented with the LOGIN screen shown.
The temporary User Name is "Admin"
The temporary Password is "PTI".
PTI is case sensitive and must be
entered as directed.
Enter this information and click the
LOGIN button in the center of the screen.
3
QUICK START GUIDE
Advertisement
Table of Contents
