Fujitsu AUXG18KVLA Design & Technical Manual page 185

3. Select the [Function No.] with pressing the [Cursor button (Left/Right)], and select the Function
No. to be set with pressing the [Cursor button (Up/Down)].
4. Select the [Setting No.] with pressing the [Cursor button (Left/Right)], and select the Setting No.
to be set with pressing the [Cursor button (Up/Down)].
5. Pressing the [Enter button], confirm the setting.
The data will be transferred to the indoor unit.
Function details: Refer to Chapter 8-8.
8-6. Indoor unit (setting by wired remote controller)
Function setting
Mo 10:00AM
R.C. Function Setting
address No. No.
00 30 - -
Cancel: OK:
Version Error history
Function setting
R.C.
address
00
Cancel:
Version
Function setting
R.C.
address
00
Cancel:
Version
Function setting
R.C.
address
00
Cancel:
Version
Error
Function setting
R.C.
address
00
Cancel:
Version
"Function details" on page 183.
- 177 -
Mo 10:00AM
Function Setting
No. No.
30 00
OK:
Error history
Mo 10:00AM
Function Setting
No. No.
30 01
OK:
Error history
Mo 10:00AM
Function Setting
No. No.
30 01
OK:
Error history
Good
Mo 10:00AM
Function Setting
No. No.
30 01
OK:
Error history
8. Function settings