Pelsis LURALITE PLUS R4 Instructions

Decorative Glueboard Insect Control
Please read these instructions carefully and store in a safe
place for future reference.
LURALITE PLUS
TM
As part of the Insect-O-Cutor brand of insect control
products, Luralite Plus
is an easy to service and highly
TM
effective decorative insect control unit for use within front of
house applications. Luralite Plus
lamps and is designed for use with a high specification
Glupac glueboard.
®
CONTENTS OF PACKAGE
- 1 x Luralite Plus flykiller
- 1 x Mains cable (Type X)
- 1 x Glupac glueboard
®
- 2 x Screws and wall plugs
- 2 x 15W High powered insect attractive UV lamps (fitted)
WARNING - THIS APPLIANCE MUST BE EARTHED (CLASS 1)
INSECT CONTROL PRODUCTS
Luralite Plus utilises high powered ultra violet lamps to
TM
attract flying insects and retains the caught insects on a
glueboard for inspection or hygienic disposal.
WARNING
Luralite Plus
is not to be used by children or persons with
TM
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction.
Children should be supervised to ensure they do not play
with the appliance.
If the mains cable is damaged it must be replaced by a
specialist mains cable available from Pelsis Ltd or your
supplier.
Not suitable for applications where potentially explosive
environments may exist.
POSITIONING AND GUIDANCE FOR USING LURALITE PLUS™
THIS UNIT IS FOR INDOOR USE ONLY, NOT SUITABLE FOR USE
IN BARNS, STABLES & SIMILAR LOCATIONS. KEEP OUT OF
REACH OF CHILDREN.
Luralite Plus
should ideally be fixed around two meters above
TM
the ground, preferably in the darkest place within the area to
be protected. Do not position the unit close to windows,
skylights or other sources of light, or where it may be obscured
by furniture, doors or other obstacles. Ideally, Luralite Plus
should be visible from every part of the area to be protected.
INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY SERVICE
PERSONNEL ONLY.
Luralite Plus should be mounted to a vertical surface using
TM
the supplied wall plugs and fixing screws. For ease of
installation and servicing, the front guard can be swung
open by first lifting up, then pulling forward. Once installed in
position, fit the Glupac glueboard in position as described in
®
the glueboard replacement section of this document. Use
the removable mains lead and plug to connect the Luralite
Plus
to an appropriate power supply.
TM
utilises highly effective UV
TM
TM
USING LURALITE PLUS
TM
Luralite Plus
should ideally be in operation for 24 hours a
TM
day, ensuring your premises are kept free of flying insects.
Insects are most attracted to Luralite Plus
there is no competition from daylight or other light sources.
CLEANING
CLEANING SHOULD BE CARRIED OUT BY SERVICE PERSONNEL
ONLY, AFTER ENSURING THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
GUARANTEE
Luralite Plus
has a two year guarantee and if maintained as
TM
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee. Ensure genuine Glupac
glueboards are used in conjunction with this product.
*Excludes lamps, glueboards and starters. Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
MOUNTING FIXING CENTRES
METHOD Luralite Plus
Wall 380mm
units at night when
TM
®
Luralite Plus