Bradford White LT199NXX1 Installation And Instruction Manual page 9

Installing the Outdoor Enclosure
1. Remove the Existing Exhaust Adapter by removing
the 4 screws and pulling up on the adapter.
Existing Exhaust
Adapter
2. Insert the VCK Exhaust Adapter and secure the
front 2 screws (re-use the 2 screws that were
removed in Step 1)
3. Insert the Exhaust Pipe into the VCK Exhaust
Adapter.
Exhaust Pipe
Phillips
4. Install the Exhaust Pipe Retainer using 2 screws
(re-use the 2 screws that were removed in Step
1), securing the Exhaust Pipe in place.
Exhaust Pipe Retainer
VCK
Exhaust
Adapter
9