Bradford White LT199NXX1 Installation And Instruction Manual page 10

10
5. Use a Phillips screwdriver to loosen front 2 hex
head screws and to remove back 2 hex head
screws on side of the unit. Place the Outdoor Vent
Cap on the unit. Make sure the gasket is applied
inside of the Outdoor Vent Cap.
Remove
Loosen
6. Use a Phillips screwdriver to tighten the 4 screws
[⑥Hexagon Head with Flange Tapping Screw (M4
x12)] to secure the Outdoor Vent Cap.
Do not overtighten. Use hand screwdrivers only.
Remove
Loosen
Detail
CAUTION
7. Insert the Bird Screen into the Exhaust Pipe and
secure with 2 screws [⑦ Philips Head Tap ping
Screw (M4 x16)] to the Outdoor Vent Cap.
Outdoor Vent Cap
Bird Screen