NEC NP-P350W Specifications page 2

DESIGNED WITH THE ENVIRONMENT IN MIND
° Extended lamp life with ECO Mode™ technology increases lamp life up to 5000 hours, while lowering power consumption
° Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
° Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
° Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
° Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with
no cooling required after shutdown) ensures efficient energy usage
° Sleep timer can be set to automatically turn off the projector at set countdown times
° Low power consumption (0.2W in stand-by mode) minimizes energy costs
° Direct power off provides instantaneous shutdown of the projector
5000-hour filter life
NEC is committed to
designing its products to
provide long lifecycles.
This commitment even
extends to components
within its products,
including the improved
filter. This virtually
maintenance-free filter
reduces the frequency
at which cleaning
is required, thereby
decreasing your total
cost of ownership.
ADVANCED SOFTWARE FEATURES
Geometric Correction
Projecting an image isn't confined to
a standard flat screen or wall with the
NEC P Series. Geometric correction al-
lows these models to project an image
on spheres, cylinders, corner angles
and many more non-standard surfaces.
Cornerstone
Enhanced keystone correction allows for horizontal, vertical and diagonal image
correction for aligned images even when the projector is set up at an angle to the
screen.
Active lens cover
This cover enables presenters to immediately mute
the audio and video, then seconds later lower the
lamp brightness to 25% for a short period of time.
Virtual Remote™ (DDC/CI)
Used over the VGA cable, you can control the projector
directly from a computer without the need for additional
control cables.