ADOR 3D Integra Operation Instructions Manual page 9

Method of Usage
Button
Move the massage balls upward to a suitable shoulder position
OK
Move the massage balls downward to a suitable shoulder position
·If you need to adjust the shoulder position after the massage program is started,
you can directly select "Shoulder Position Adjustment" to enter the shoulder
position adjustment interface; you can press "Up Key" or "Down Key" to adjust the
shoulder position height; you can press "Left Button" to return to the previous
menu, or wait for 10 seconds to automatically return to the information interface
Auto Mode
20:00
Comfort massage>
Knead
Back speed
Air intensity
Adjustment
Select the object with
3) Massage position adjustment
·After entering the massage program, if you need to adjust the massage position,
you can press the "Menu" button on the remote controller to select "Manual
Function" to enter; you can select any one of the manual functions, and then press
"Left Button" to return to the information interface (i.e. The information interface will
switch to the manual function interface)
·In the manual function interface, if the massage range shows a fixed point or local
area, you can directly press "Up Key" or "Down Key" to adjust the manipulator
upward and downward
·In the manual function interface, if the massage range displays neither fixed point
nor local area, you need to select "Massage Adjustment" to enter, and then select
"Massage Range", and a fixed point or local area, and press "Left Button" to return
to the information interface. Next, you need to press "Up Key" or "Down Key" to
adjust the manipulator upward and downward
Description
20:00
Shoulder position
Back intensity
Roll speed
Shoulder
◀▶
and press OK Pl e ase use ▲▼ to adj u st the shoul d er posi t i o n and press OK
14
Method of Usage
20:00
Note: you can't adjust the massage position when it is in auto program.
3.Pause button
·While the massage function is in service, press "Pause" button to temporarily stop
all the massage functions; press "Pause" button again to continue the massage
function before pause. If the pause time exceeds 20 minutes, all the massage
functions will be automatically turned off.
4.Menu button
·Press "Menu Button" to enter the massage function selection interface of the main
menu, including automatic, manual, and other functions, health check, intelligent
storage, angle adjustment, settings and other function interfaces.
·Enter the menu interface. Press "Up Key" or "Down Key" to select the function.
Confirm via "OK" to enter the next level of selection; press "Left Button" to return to
the previous menu interface.
20:00
Manual Mode
Main Menu
20:00
Auto program
Knead>
Range:Spot
Manual Mode
Width:2
Other functions
Health check
Back speed
Customise
Air intensity
Adjustment
Setting
use ▲▼ to adj u st the massage posi t i o n at the Spot and Parti a l
Select the object with ▲▼ and press OK
Pause
Press the pause button again
to resume using
15
20:00
Back intensity
Roll speed
Shoulder