ADOR 3D Integra Operation Instructions Manual page 16

Method of Usage
7) Massage adjustment
·In the state of the information interface, press "Left Button" or "Right Button" to
select the massage adjustment button, and press "OK" to enter the massage
adjustment interface.
·Massage adjustment includes: 7 massage adjustment functions can be selected,
including back massage speed, back massage intensity, massage range, massage
width, airbag intensity, roller speed, and massage time.
·After entering the massage adjustment interface, press "Up Key" or "Down Key" to
select the desired massage adjustment function. After selecting any one of the
desired massage adjustment functions, use "Right Button" to enter the massage
level selection interface. Then press "OK" to confirm the selected level. Press "Left
Button" to return to the previous menu interface.
20:00
Auto Mode
20:00
Comfort massage>
Knead
Back speed Back intensity
Air intensity Roll speed
Adjustment Shoulder
◀▶
Select the object with and press OK
Function
Back massage
5 speed levels adjustable
speed
Back massage
5 intensity levels adjustable
intensity
There are 5 modes for your choice: fixed point, local area,
Massage range
full back, upper back, and lower back
Massage width 5 width levels adjustable
Airbag intensity 5 intensity levels adjustable
Roller speed Choose from 4 modes including OFF and Level 1-3
Massage time Choose from 4 modes: +10min, +5min, -5min, -10min
20:00
Adjustment
Back Speed 1
Back intensity 2
Massage area 3
Massage width 4
Air intensity 5
Roll Speed
Select the object with ▲▼ and press OK
Description
28
Method of Usage
Note:
·According to the remaining massage time, when the displayed time is not enough
for the addition and subtraction of a certain time, the operation will not be
displayed (the upper limit of the time display is 40 minutes). For example: If the
display time of the remote controller is 39 minutes, the massage time adjustment
range will be: -5min, -10min (+10min or +5min cannot be displayed).
·The adjustment of airbag intensity can only be used when the airbag function or
the automatic function is enabled (for more information about how to enable the
airbag function, refer to Page 19 of the Operation Instructions).
5.Zero-gravity key
·Press "Zero-gravity Key" to adjust the position of zero gravity. You can choose
different angle positions for zero gravity according to your own needs (i.e. 1st
pressing is Level 1; 2nd pressing is Level 2; 3rd pressing is Level 3; and 4th
pressing makes the massage chair restore to the original state).
Button
Zero-gravity Key: Once it is pressed, the positions of the legrest and
the backrest can be automatically adjusted to the positions for zero
gravity.There are three zero-gravity modes and the lying OFF mode,
which can be switched.
Description
29