Advertisement
WARNING:
This product is to be used as part of a personal fall protection system. The user must
read the manufacturer's instruction and be familiar with each component of the
equipment. The user must fully understand this instruction and to be trained before using
this equipment. This equipment should not be used for material lifting or any other use
other than a fall protection system. This product is intended for one person using. Any
alteration and misuse of this equipment, or failure to follow instructions, may result in
serious injury or death.
IMPORTANT:
If you have questions on the use, care, installation or suitability of this Fixed Beam
Anchor for your application, please contact your dealers, distributors, or manufacturer for
a guide.
1
10
11
The Fixed Beam Anchor consists of the following components:
1. Fixed Clamp
2. Sliding Clamp
3. Hexagonal Rod
4. Adjustment Block
5. Safety Lock
6. Quick Release Lock Pin
FIXED BEAM ANCHOR COMPONENTS
3
9
2
7. Clamp Adjusting Screw
8. Tightening Handle
9. Positioning ratchet for Lock Pin
10. D-Ring Bracket
11. Swivel D-Ring
4
7
8
6
5
Advertisement
