Table of Contents
Advertisement
1. INTRODUCTION
Thank you for purchasing DIG's BTC-ASV Single Station Battery
Operated Timer. This manual describes how to get the BTC-ASV series
timer up and running quickly. After reading this manual and becoming
familiar with the basic functionality of the timer, use the manual as a
reference for less common tasks in the future.
2. ABOUT THE BTC - ASV BATTERY OPERATED TIMER
The BTC-ASV series irrigation timer employs the latest in Bluetooth®
technology using the free DIG BTT app for Android™ or iPhone®. The
BTC-ASV is available as a single station battery operated timer and is
powered by two AA batteries that can last up to one year using name
brand alkaline batteries. The timer is enclosed in a compact, waterproof
housing to protect it from degradation.
3. INSTALLING THE BATTERIES
1. Open the battery compartment cap
by turning it counterclockwise.
2. Install two fresh, brand name, AA
alkaline batteries (not included)
and note the proper direction of the
positive and negative orientation on
the underside of the timer.
3. Insert and screw the battery
cap clockwise. Make sure to
securely tighten the cover firmly
by hand only.
The timer will now appear on
the smartphone app and is ready to
be connected to and programmed.
2
Advertisement
Table of Contents
