Fantom XF732H Quick Start Manual

Style # XF732H
Warning
To reduce the risk of electric shock, the power cord must be
:
disconnected before removing the dust cup, changing or
cleaning the HEPA filter or performing maintenance/trouble
shooting checks.
Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen
To remove the dust cup container
from the vacuum:
1. Lift the dust cup handle and lift the
dust cup container out.
2. To remove the Rinseable
"TapClean" HEPA dust
cup filter from the
dust cup container,
Lock
hold the dust cup
container from the
handle and turn
counter clockwise
to release the dust
cup cover.
3. After you have removed the dust cup
cover from the dust cup container,
hold the dust cup
handle with one
hand and twist the
HEPA filter counter
clockwise holding it
from the filter stem
to remove from
the dust cup cover.
4. After you have
removed the
Twist
Rinseable "TapClean"
HEPA dust cup filter from
the dust cup, separate the
debris screen from the
HEPA filter cartridge by
holding the top rim of the
filter and twisting the
debris screen counter-
clockwise to unlock the
debris screen from the
filter. Then lift the debris
screen to remove.
for Model FM732H
1 HEPA Filter
5. Rinse the debris screen
under the faucet with
lukewarm water until
clean. Allow to air dry for 24 hours.
Do NOT wash in dishwasher.
6. To replace the debris screen onto the
filter, slip the debris screen over the
filter and twist clockwise to lock in
Open
place.
Warning
After each Use - Always
:
remove the Rinseable "TapClean" HEPA
Filter from the Dust Cup, then vigorously
"TapClean" HEPA Filter until no more
dust can be removed.
Important:
When "TapCleaning" the
HEPA filter, hold the HEPA filter from the
stem and tap ONLY the top rim against
the side of the waste container. NEVER
tap directly on the pleated folds of the
HEPA filter.
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1-800-275-9251
Warning
Cleaning the Rinseable "TapClean" HEPA Dust Cup Filter & Debris Screen
To remove the dust cup container
from the vacuum:
1. Lift the dust cup handle and lift the
dust cup container out.
2. To remove the Rinseable
"TapClean" HEPA dust
cup filter from the
dust cup container,
hold the dust cup
container from the
handle and turn
counter clockwise
to release the dust
cup cover.
3. After you have removed the dust cup
cover from the dust cup container,
hold the dust cup
handle with one
hand and twist the
HEPA filter counter
clockwise holding it
from the filter stem
to remove from
Stem
the dust cup cover.
4. After you have
removed the
Rinseable "TapClean"
HEPA dust cup filter from
the dust cup, separate the
debris screen from the
Top Rim
HEPA filter cartridge by
holding the top rim of the
filter and twisting the
debris screen counter-
clockwise to unlock the
debris screen from the
filter. Then lift the debris
FANTOM
screen to remove.
Style # XF732H
for Model FM732H
1 HEPA Filter
To reduce the risk of electric shock, the power cord must be
:
disconnected before removing the dust cup, changing or
cleaning the HEPA filter or performing maintenance/trouble
shooting checks.
5. Rinse the debris screen
6. To replace the debris screen onto the
Lock
Open
Warning
remove the Rinseable "TapClean" HEPA
Filter from the Dust Cup, then vigorously
"TapClean" HEPA Filter until no more
dust can be removed.
Important:
HEPA filter, hold the HEPA filter from the
stem and tap ONLY the top rim against
the side of the waste container. NEVER
tap directly on the pleated folds of the
HEPA filter.
Twist
under the faucet with
lukewarm water until
clean. Allow to air dry for 24 hours.
Do NOT wash in dishwasher.
filter, slip the debris screen over the
filter and twist clockwise to lock in
place.
After each Use - Always
:
When "TapCleaning" the
Stem
Top Rim
FANTOM
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1-800-275-9251