Table of Contents
Advertisement
How to LOAD Clips (CUE)
Before loading a clip, be sure at least one video channel is ACQUIRED on the Abekas 6000 control panel and select the
channel you wish to load a CLIP ID into. For example press the
should be illuminated GREEN — if not, follow the procedure "To ACQUIRE a Video Channel ", starting on page 2 above.
1. Press the green
C L I P
2. On the numeric keypad, type a 1- through 7-digit CLIP ID that you wish to load.
3. Press the specific CHANNEL button (
into that specific video channel.
• Alternative Method
1. Press the green
C L I P
2. Press the specific CHANNEL button (
3. On the numeric keypad, type a 1- through 7-digit CLIP ID that you wish to load.
4. Press the
C L I P
I D
How to PLAY
Clips.
1. Press the green
C L I P
2. Press the specific CHANNEL button (
you wish to PLAY.
3. Press the
button. The clip will PLAY to the end.
How to GO TO START of Clip
To instantly go to the START frame of the currently loaded clip (RECUE):
1. Press
+
. This will instantly cue to the starting frame of the clip.
How to GO TO END of
To instantly go to the END frame of the currently loaded clip:
1. Press
+
. This will instantly cue to the end frame of the clip.
Page 6 of 12
.
button (this is necessary only if the lamp below the button is not already illuminated).
P L A Y
C h A
button (this is necessary only if the lamp below the button is not already illuminated).
P L A Y
C h A
button.
button (this is necessary only if the lamp below the button is not already illuminated).
P L A Y
C h A
(RECUE).
Clip.
button. The lamp below the CHANNEL button
C h A
,
,
, etc.). The defined CLIP ID is now loaded
C h B
C h C
,
,
, etc.).
C h B
C h C
,
,
, etc.), which has the CLIP ID loaded that
C h B
C h C
Quick Reference Guide
Revised: October 21, 2004 @ 9:55 AM
Advertisement
Table of Contents
