Accom Abekas MultiFlex 6000 Quick Reference Manual page 11

Dtv server
Table of Contents

Advertisement

Quick Reference Guide
How to TRIM
Clips.
This feature allows you to TRIM the "head" and "tail" portions of clips using the MODIFY (TRIM) function.
W A R N I N G !
This is a destructive process and material trimmed from any CLIP will be permanently lost.
1. Press the green
2. Load the CLIP ID you wish to TRIM in the channel you desire.
3. Press the blue
M O D I F Y
4. PLAY, JOG or SHUTTLE the CLIP to the point you wish to TRIM. If this is the new IN point you desire, press
MARK IN. If this is the new OUT point, press MARK OUT.
5. To preview the new TRIM point(s), press the
and OUT points.
6. If you are satisfied with the new mark IN and OUT points, press and hold
TRIM. A confirm prompt will appear in the LCD display before the clip is finally TRIMMED.
7. Press the
E N T E R
How to TITLE
Clips.
You may TITLE clips that are allocated to be recorded, are in record or have already been recorded.
N O T E
You must have a QWERTY keyboard connected to the Abekas 6000 control panel of which you are using in order to TITLE clips. You may also
TITLE clips via PC or MAC, if the Abekas 6000 Content Management Panel (CMP) is connected.
1. Press the green
2. Cue the CLIP you wish to TITLE in the channel you desire.
3. Press the blue
4. Begin to TITLE the clip by using the QWERTY keyboard attached to the Abekas 6000 control panel.
5. Once the TITLE is completed, press the
6. You may also CUE and TITLE multiple CLIPS, while remaining in the TITLE mode. Repeat steps 4-6, once you
have CUED another CLIP to TITLE.
7. Press the green
Revised: October 21, 2004 @ 9:55 AM
button (this is necessary only if the lamp below the button is not already illuminated).
C L I P
P L A Y
button (CLIP TRIM).
button to execute the TRIM.
button (this is necessary only if the lamp below the button is not already illuminated).
C L I P
P L A Y
button.
T I T L E
E N T E R
button to exit the TITLE mode.
C L I P
P L A Y
button. This will PLAY the CLIP within the new mark IN
T A K E
button.
+
buttons to execute the
M O D I F Y
Page 11 of 12

Advertisement

Table of Contents
loading

Table of Contents