Table of Contents
Advertisement
How to PLAY Clips in SLOW
This will allow you to play clips in VAR-PLAY speeds, other than 100% normal play speed.
N O T E
Field-based video CLIPS that are set to FIELD (VI) OUTPUT MODE in the MODIFY ATTRIBUTES menu will play with less stuttering motion at
speeds less than 100%. Frame-based video CLIPS that are set to FRAME OUTPUT MODE will play with fewer motion artifacts.
1. Press the green
2. Load the CLIP ID you wish to PLAY in SLOW MOTION in the channel you desire.
3. In the numeric keypad, type a variable speed value expressed as a percentage of 100% play speed. For
example, for one-quarter play speed, type " 25 ".
4. Press the
button.
5. To return PLAYING a CLIP at 100% (NORMAL) play speed, press the
How to LOOP
Clips.
This will allow you to LOOP single or multiple CLIPS using the LOOP function.
1. Press the green
2. Cue the CLIP in the channel you desire.
3. Toggle the
4. Press the
button.
5. The clip will play forward to the end frame, automatically jump to the starting frame and then play forward again.
6. To disable the loop function, toggle the
illuminated.
7. To save the loop function in a clip so that loop is automatically enabled the next time the clip is loaded, press and
hold the
+
END
Page 12 of 12
MOTION.
button (this is necessary only if the lamp below the button is not already illuminated).
C L I P
P L A Y
button (this is necessary only if the lamp below the button is not already illuminated).
C L I P
P L A Y
button located just above the Jog Knob, until the loop
buttons while the loop
button until neither the loop
icon is illuminated.
Quick Reference Guide
button.
icon is illuminated.
icon or the ping-pong icon are
Revised: October 21, 2004 @ 9:55 AM
Advertisement
Table of Contents
