NEC SpectraView 2190 User Manual page 24

 | SPECTRAVIEW II - USER'S GUIDE
Primary Colors
Red, Green and Blue CIE x,y - shows the measured color coordinates of the display's primary colors.
These values represent the color gamut of the display. The source of the color measurements will depend
on the Primary Colors Chromaticity Source setting in the Preferences dialog.
Display Luminance
The Target values show the currently selected Target's Black Level and Intensity.
The Calibrated values show the actual measured Black Level and Intensity after the display has been
calibrated.
Contrast Ratio
The Contrast Ratio is the ratio of the Intensity to the Black Level. The Target value shows the currently
selected Target's Contrast Ratio. For LCD display monitors, this is set to "N/A" since the monitor's Black
Level is fixed.
The Calibrated values show the actual contrast ratio calculated using the actual measured Black Level and
Intensity after the display has been calibrated.
Gamma Curve
Target shows the type or gamma value of the Target Gamma Curve.
Calibration Steps - shows the number of calibration steps used to measure the grayscale when the
calibration was performed.
ICC Profile
File Name shows the name of the ICC/ColorSync profile, if one was generated after the display was
calibrated.
Description shows the description tag text of the ICC/ColorSync profile, if one was generated after the
display was calibrated.
Display Monitor
Model shows the model name of the currently selected display.
Seral # - shows the serial number of the currently selected display.
Firmware - shows the internal firmware version of the currently selected display.
Current Usage shows the total number of hours that the currently selected display has been in use.
Last Calibration shows the number of hours that the currently selected display has been used since it was
last calibrated.
Calibration Date shows the date and time that the monitor was last calibrated to the currently selected
target.
Calibration Sensor
Model shows the model name of the calibration sensor used when the calibration was performed.
Seral # - shows the serial number of the calibration sensor used when the calibration was performed.