Table of Contents
Advertisement
CHAPTER 2: INSTALLATION
CAUTION:
CAUTION
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
Figure 3: Panel mounting and cutout dimensions
INSTALL RELAY
FROM FRONT
OF THE PANEL
3.775"
(95,89 mm)
The DIN rail mounting is illustrated below. The DIN rail conforms to EN 50022.
To avoid the potential for personal injury due to fire hazards, ensure the unit is
mounted in a safe location and/or within an appropriate enclosure.
Figure 4: DIN rail mounting
SNAP-IN THE DIN CLIPS (QTY: 4)
FOR DIN RAIL MOUNTING
The screw mount for high vibration environments is illustrated below.
5.580"
0.105"
(141,73 mm)
(2,67 mm)
5.790"
(147,07 mm)
DIN 3 RAIL
MECHANICAL INSTALLATION
#4 - 40x3/8in SELF-TAP PAN HD PHILIPS
QTY: 6 (SUPPLIED); GE PART NO. 1402-0017
TIGHTENING TORQUE: 8 lb-in
REAR OF PANEL
CUTOUT AND
MOUNTING HOLES
0.138"
(3,49 mm)
1.750"
(44,45 mm)
3.500"
(88,90 mm)
0.130"
(QTY: 6)
(3,30 mm)
889725A1.CDR
0.30"
(7,6 mm)
(35,1 mm)
889726A1.CDR
1.38"
2–3
Advertisement
Table of Contents
