Assembly (continued)
3
Attaching the canopy
□ Unfold the canopy. Place the canopy over the top of the frame. Use the hook and loop straps to secure each corner of the canopy to .
the frame. (Fig. 4)
□ To secure the canopy to the frame, wrap the hook and loop straps around the corner ribs and cross beams (Fig. 5 & 6 ).
□
Pull down the inside valances of the canopy until they cover the cross beams of the frame. Secure the adjacent valances together
for a clean look. (Fig. 7)
4
Attaching the netting panels
□ Roll up the outside valance. Attach netting panels to the inner side of outside valance with hook and loop straps. (Fig. 8)
(Fig. 8)
Fig. 4
5
Please contact 1-800-245-2217 for further assistance.
Fig. 6
HOMEDECORATORS.COM
Fig. 5
Fig. 7
Need help?
Do you have a question about the Get Up & Go 5AGZ1053 and is the answer not in the manual?