Related Manuals for Seura FS-1
Summary of Contents for Seura FS-1
- Page 1 WARRANTY REGISTRATION " REGISTER FOR EXTRA BENEFITS Activate within 30 days of purchase: seura.com/activate 14" OUTDOOR TV FLOOR STAND INSTALLATION GUIDE 2 " X 1" Model Number: FS-1...
- Page 2 Keep this manual for future reference. lag screws must be mounted into the supporting members. This product is designed to mount Seura outdoor televisions and accessories weighing up to 220 lbs. • Make sure there are no water or natural gas lines to a concrete pad or engineered wooden structure.
-
Page 3: Installation Tools
Installation Tools The following tools may be required depending upon your particular Parts and Tools Required (not included) The following tools may be required depending on your particular installation. They are not included. ¼˝ Drill Bit for ˝ Electronic Stud Finder Wood Stud Pencil Level... -
Page 4: Parts Included
Parts Included Before using the device, please check the following contents of the box for completeness. Illustrations are not to scale. If any parts are missing or damaged, contact Séura. " " 1" " " (4) 3/8” x 3” Stainless Steel Concrete Large Diameter Tapcon Screws 44"... - Page 5 Parts Included, Packaged as TW-5 Mounting Plate (2) Tilt Mount TV Brackets Mounting Tools and Hardware (4) Security Torx T27 x 1.0 x 16mm Screws (6) Plastic Anchors, 3” long (6) Stainless Steel Lag Screws 5/16”, 3” long Included with some For concrete, brick, and mount models stone installation only...
- Page 6 Features Top Leveling Screws Allows for leveling adjustments of the TV after mounting. Tilt Locking Bolts Allows for tilt angle of the TV Directional adjustment. Mounting Arrows The arrow lets you know which edge is up. Bottom Locking Screws Prevents the TV from being removed or dislodged from the...
- Page 7 Cable Pass Through Run power and content cables through the pole and connect to the TV inputs. The power cord included with Séura’s Full Sun Series 85-inch Outdoor TV (model UB4-85) does not fit inside Swivel Adjustment of the mount pole. The cord must run alongside the pole Loosening allows and will not be neatly tucked...
- Page 8 Step 1: Assemble and Prepare Mount " " " " 1. Attach mounting plate to floor stand 1" 1" Using four of the included 1/4-20x1/2 security torx screws or four of the included 1/4-20x1/2 black stainless " " " " steel hex head screws, and four flat washers, attach the mounting plate to the floor stand rails as shown.
- Page 9 2. Adjust floor stand length/TV height " " Loosen the screws with the provided T27 Security Torx Screwdriver or 4mm Allen Wrench. Adjust to the desired height of the stand. Tighten screws. 1" " " " " 1" " " 44"...
-
Page 10: Installation
IMPORTANT: HANDLE THE TV IN A VERTICAL POSITION TO AVOID DAMAGE TO THE SCREEN. IF PLACING THE TV SCREEN-SIDE DOWN OR LEANING AGAINST A WALL DURING INSTALLATION, COVER THE SCREEN WITH A PROTECTIVE CLOTH OR BLANKET. Installation IMPORTANT: This product must be mounted to a uniform sub-structure such as poured concrete at least 4” thick or engineered decking with footings. - Page 11 2. Drill pilot holes Wood Joist Mounting: Pre-drill the marked holes on the floor 3-inches deep with a 7/32” drill bit. Concrete: Pre-drill the four marked holes on the floor at least 4-inches deep with a 5/16” masonry drill bit.
- Page 12 3. Attach floor mounting plate Align the mounting plate with the pre-drilled holes. Ensure that the cable pass through holes on the mount are positioned appropriately. Wood Joist Mounting: Concrete: Attach mounting plate to the floor using the six lag Make sure the anchor is seated completely flush screws and six flat washers.
- Page 13 Step 3: Attach Tilt Mount TV Brackets to TV Note: If installing with a soundbar or if the TV’s VESA screws are IMPORTANT: Check your TV manual before attaching mount brackets not long enough to attach the Tilt to TV. Some models require attaching soundbar brackets in tandem Mount TV Brackets, then use the with attaching mount brackets.
- Page 14 Step 4: Hang the TV and Connect Power and Content Cables IMPORTANT: NEVER TRY TO HANG A TV BY YOURSELF. ALWAYS USE AT LEAST TWO PEOPLE TO LIFT THE TV INTO PLACE. 1. Lift the TV and bring the back of the TV towards Do not let go of the TV until you are certain that the the mount, positioning it slightly above the top and bottom hooks of both mounting brackets...
- Page 15 Step 5: Adjust the TV Caution: It is possible to dislodge your TV while you level it. Use extreme caution until you tighten the leveling and locking screws. Top Leveling Screw Allows for leveling adjustments of the TV Séura recommends checking knobs, screws, and bolts after mounting.
- Page 16 Tilt adjustment: Adjusting the TV Tilt Angle 1. Place one hand on the center-top edge of the TV. 2. Place the other hand on the center- bottom edge of the TV. 3. Using the upper hand, gently pull the top of the TV towards you while the lower Tilt hand gently pushes the bottom of the TV...
-
Page 17: Specifications
Specifications FLOOR STAND Model: FS-1 DISPLAY COMPATIBILITY 42" - 86" Séura Outdoor TVs* VESA COMPATIBILITY Compatible with VESA mount patterns up to 600×400 Swivel 360° / - 360° CUSTOMIZABLE VIEWING Extend from 28.5" to 43" (in 2" increments) from installation surface Collapsed: 26.25"... - Page 18 " " " " 1" 1" " " " " 44" 44" 14" 14" 14" 14"...
- Page 19 LIMITED PRODUCT WARRANTY For information regarding Séura’s warranty policy, please visit our website: www.seura.com/warranty. If the current Séura warranty policy is after your product purchase date, please contact Séura Customer Support to request warranty documentation from the date of your purchase.
Need help?
Do you have a question about the FS-1 and is the answer not in the manual?
Questions and answers