Page 1
USER MANUAL Tilting Wall Mount FOR SÉUR A 42” - 86” OUTDOOR T Vs MODEL NUMBER TW-3 W W W. SEUR A .COM...
Page 2
Important Safety Information Prior to the installation of this product, read all instructions. Keep this manual for future reference. Proper installation procedure by a qualified service technician must be followed as outlined in these installation instructions. Failure to do so could result in property damage, serious personal injury, or event death. Safety measures must be practiced at all times during the assembly of this product.
Page 3
THE INFORMATION CONTAINED IN FRACTIONAL: 1/16" THIS DOCUMENT IS THE SOLE ANGULAR: DESCRIPTION TILT MOUNT ASSEMBLY VIEW PROPERTY OF THE MANUFACTURER. www.seura.com ANY REPRODUCTION IN PART, OR TWO PLACE DECIMAL: .03" 1.800.95.SEURA AS A WHOLE, WITHOUT THE THREE PLACE DECIMAL: .015" MATERIAL FINISH PH.
Page 4
Features Tilt Locking Bolts Allows for tilt angle of the TV adjustment. Directional Mounting Arrows The arrow lets you know which edge is up. Top Leveling Screws Allows for leveling adjustments of the TV after mounting. Cable/Electrical Cut Out A large opening on the wall plate allows for easy cable access and power distribution installations.
THIS DOCUMENT IS THE SOLE ANGULAR: DESCRIPTION DATE PROPERTY OF THE MANUFACTURER. TILT MOUNT ASSEMBLY VIEW www.seura.com 16 JUL 2018 TWO PLACE DECIMAL: .03" ANY REPRODUCTION IN PART, OR location wall studs in the vicinity of the wall plate. 1.800.95.SEURA wall studs.
Page 6
Step 3 Drill a “pilot hole” in the center of the upper-right mark using a ¼″ drill bit and power drill. Only use a ¼″ drill bit when drilling the pilot holes. Installing the Wall Plate : Wood Stud Installation Cont. Step 4 Place the wall plate against the wall and align it with ...
Page 7
Concrete Installation The supplied ″ concrete wedge anchors must be used for concrete installation. ″ Example of Concrete Drill Bit (Not Included) You will need a ″ concrete drill bit, which is Installing the Wall Plate: Concrete Wall Installation ˝ Flat Washers Universal Spacers Security Barrel Thread Depth Indicator...
Installing the Mounting Bracket (cont’d) Installing the Mounting Bracket Locking Screw Installation You must install the locking screws before you Installing the Mounting Bracket (cont’d) panel. The locking screws consists of two (2) M6 x Locking Screw Installation Locking Screw Installation 120mm screws.
Page 9
Do not overtighten the mounting hardware. Do not overtighten the mounting hardware. Proceed to the “Attaching the Flat Panel to the Wall oceed to the “Attaching the Flat Panel to the Wall Plate” section. te” section. Installing the Mounting Bracket Attaching the Flat Panel to the Wall Plate taching the Flat Panel to the Wall Plate Attaching the TV to the Wall Plate...
Page 10
P5080T Mounting Bracket Adjustments Mounting Bracket Adjustment Leveling Screw Adjustment If your flat panel is tilted too far to one side, the leveling screws will allow you to compensate for this tilt by adjusting the screws with a screwdriver. Top Leveling Screw Adjustment If your TV is not level, the Top Leveling Screws will allow you Loosen both locking screws.
DESCRIPTION DESCRIPTION PROPERTY OF THE MANUFACTURER. PROPERTY OF THE MANUFACTURER. TILT MOUNT ASSEMBLY VIEW TILT MOUNT ASSEMBLY VIEW www.seura.com www.seura.com 16 JUL 2018 16 JUL 2018 ANY REPRODUCTION IN PART, OR ANY REPRODUCTION IN PART, OR TWO PLACE DECIMAL: .03"...
Page 12
Séura does not warrant its software or programs, or any content downloaded after shipment. request and are also available on the Séura website at https://www.seura.com/warranty/. This It is the purchaser responsibility to take precautions to protect the product from malware, warranty is valid only with respect to Product sales in the U.S.
Need help?
Do you have a question about the TW-3 and is the answer not in the manual?
Questions and answers