Universal Explore Home 827-04M Instruction Sheet

827-04M
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts that may have come loose inside the carton during shipment.
Caution: (1) These parts are cumbersome and heavy. This product can best be assembled with the
assistance of one or more persons in order to prevent personal injury and to insure parts are not damaged
during the assembly process. If dirty, clean finished parts with mild dishwashing liquid and water solution
applied on damp cloth. Cloth should not be excessively wet. Polish finish with soft cloth and an industry
recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for
stain residue and rough surfaces and also check for staples or nails left after removing the packaging material.
The manufacturer will not be held responsible if preventative steps are not taken prior to installation.
(3) Unpack and dispose of all packing material but be careful not to throw away any assembly parts or
hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for
packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging flooring.
(4) During normal use everyday, screws, bolts, nuts and wooden plugs may loosen up. They should be
periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or cause

PARTS LIST:

injury. Always check to be sure all hardware on this list and the above mentioned components is attached to
the furniture properly and kept tightened at all times.

Assembly Procedure

# Description
A Mirror
Step 1: Unpack, inspect, and read assembly instruction carefully. Lay out the parts and hardware.
Make sure the quantity of each is correct.
Step 2: Drill the holes (around diameter 1/4") on the hollow wall in same level. Put the expansion
bolts into the holes, and use screwdriver to lock them tightly to let the anchor expand as
shown below. To make sure they are fixed, you can use hand to pull them. And then take the
bolts out from expansion bolts, keep them for the next step.
Assembly is now complete.
Step 3: Attach the metal bracket (B) to the mirror( A) with screws (3). Put the mirror (A) on the wall,
make sure the holes are fitted with the holes on the wall. Then fix it with bolts from Step 2.
Then put the mirror (A) onto the hooks (2).
INSTRUCTION SHEET
Qty.
: (Please follow the sketches below.)
1pc

HARDWARE LIST(B)

METAL BRACKET
HOOK
WOOD SCREW
EXPANSION BOLT
1
2
3
4
# Description
B Hardware pack
Mirror
Qty.
1bag
Q'TY
2PCS
2PCS
4PCS
3PCS