NEC MultiSync P1150 Information Manual page 6

Tools 1
Language: OSM
OSM Position: You can choose where you would like the OSM
controls image to appear on your screen. Selecting OSM Position
allows you to manually adjust the OSM controls menu left, right,
up or down.
OSM Turn Off: The OSM controls menu will stay on as long as it is
in use. In the OSM Turn Off sub-menu, you can select how long the
monitor waits after the last touch of a button to shut off the OSM
controls menu. The preset choices are 10, 20, 30, 60 120 seconds.
OSM Lock Out: This control completely locks out access to all OSM
controls functions. When attempting to activate OSM controls while in
the lock out mode, a screen will appear indicating that OSM controls
are locked out. To activate the OSM Lock Out function, press
PROCEED, then
OSM Lock Out, press PROCEED, then
simultaneously.
IPM System Off Mode:
™
NOTE: For standard systems and graphics boards, keep the
factory setting at ENABLE.
Factory Preset: Selecting Factory Preset allows you to reset all OSM
control settings back to the factory settings. A warning statement will
appear to confirm that you do want to reset ALL settings. Individual
settings can be reset by highlighting the control to be reset and
pressing the RESET button.
78131622
Controls
™ controls menus are available in 6 languages.
and hold down simultaneously.To deactivate the
Enable: The IPM System works
Disable: The Off Mode of the IPM
4
6
and hold down
normally and all stages of
energy savings are utilized.
System is not used.
7/29/98, 8:59 AM