Specifications - Kenwood DMX7722DABS Instruction Manual

Troubleshooting Troubleshooting
"Dial Error" appears.
→ Dialing has failed. Try the operation again.
"Hung Up Error" appears.
→ The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
"Pick Up Error" appears.
→ The unit has failed to receive a call.
Bluetooth audio
Bluetooth audio played is disconnected.
→ When iPhone for Apple CarPlay or Android Auto
device is connected, the currently connected
Bluetooth device is disconnected.
The sound is interrupted or skipped while using a
Bluetooth audio player.
→ Reduce the distance between the unit and the
Bluetooth audio player. Disconnect the device
connected for Bluetooth phone if any.
→ Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be controlled.
→ Check whether the connected audio player
supports AVRCP (Audio/Video Remote Control
Profile).
58 ENGLISH

Specifications

Specifications
Monitor section
Picture Size (W × H) 6.75 inches (diagonal) wide
151.8 mm × 79.7 mm
Display System TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1 152 000
(800H × 480V × RGB)
Effective Pixels 99.99%
Pixel Arrangement RGB striped arrangement
Back Lighting LED
USB I/F section
Connector Type Type-A
USB Standard USB 2.0 Full Speed/High
Speed
File System FAT 16/32, exFAT
Maximum Power
DC 5 V 1.5 A
Supply Current
D/A Converter 24 bits
Audio Decoder MP3/WMA/AAC/WAV/FLAC
Video Decoder MPEG1/MPEG2/MPEG4/
WMV/H.264/MKV
Frequency Response 192 kHz Sampling:
20 Hz to 20 000 Hz
96 kHz Sampling:
20 Hz to 20 000 Hz
48 kHz Sampling:
20 Hz to 20 000 Hz
44.1 kHz Sampling:
20 Hz to 20 000 Hz
Total Harmonic 0.010% (1 kHz)
Distortion
Signal to Noise Ratio 98.5 dB
Dynamic Range 89 dB
Bluetooth section
Technology Bluetooth V5.0
Frequency 2.402 GHz to 2.480 GHz
RF Output Power –8 dBm (MAX)
(E.I.R.P.)
Maximum Line of sight approx. 10 m
Communication
Range
Audio Codec SBC/AAC
Multi Profile Support Multi Profile