RANGE WARD Power Grazer Trailer Operation Manual page 9

Do not operate the Power Grazer Trailer within restricted Class 1 –
Hazardous Location Areas, such as oil and gas installations.
REMEMBER: If Safety Signs have been damaged, removed, become illegible or parts replaced
without decals, new decals must be applied. New decals are available from your authorized
distributor or factory.
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replaced parts that displayed a safety sign should also display the current sign.
•
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
•
How to Install Safety Signs:
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the decal over the specified area and carefully press the small portion with the
•
exposed sticky backing in place.
Slowly peel back the remaining paper and carefully smooth the remaining portion of the
•
decal in place.
Small air pockets can be pierced with a pin and smoothed out using the piece of decal
•
backing paper.
/Users/helix/MediaMorphosis/_RangeWard/Documentation/Manuals/Power Grazer Trailer Manual v9.docx
N:\S_Wp\Setups\Normal\Normal.dot
SAFETY DECAL CARE
7