Be certain all moving parts on attachments have come to a complete stop before attempting
•
to perform maintenance.
Always use a safety support and block the wheels. Never use a jack to support the
•
equipment.
Always use the proper tools or equipment for the job at hand.
•
Use extreme caution when making adjustments.
•
Never replace hex bolts with less than grade five bolts unless otherwise specified.
•
After servicing, be sure all tools, parts and service equipment are removed.
•
Where replacement parts are necessary for periodic maintenance and servicing, genuine
•
factory replacement parts must be used to restore your equipment to original specifications.
The manufacturer will not claim responsibility for use of unapproved parts and/or
accessories and other damages as a result of their use.
If equipment has been altered in any way from original design, the manufacturer does not
•
accept any liability for injury or warranty.
If repairs require the use of a torch or electric welder, be sure that all flammable and
•
combustible materials are removed.
Cleaning solvents should be used with care. Petroleum based solvents are flammable and
•
present a fire hazard. Don't use gasoline. All solvents must be used with adequate
ventilation and their vapors should not be inhaled.
Do not operate the Power Grazer Trailer within restricted Class 1 –
Hazardous Location Areas, such as oil and gas installations.
/Users/helix/MediaMorphosis/_RangeWard/Documentation/Manuals/Power Grazer Trailer Manual v9.docx
N:\S_Wp\Setups\Normal\Normal.dot
19