Table of Contents
Advertisement
Notice – When retrieving the rope, always
remove the rope from the pigtail posts BEFORE
re-spooling the rope. The rope will cut the
plastic insulation on top of the pigtail post
when it is pulled through!
Turn fence energizer to off position. Remove
rope from each post and store in post rack
provided on the trailer. Unhook rope from
secure end post. Return to trailer and hold the
safety reel button while training the rope onto
the reel.
Notice – The safety reel switch is a push button
located at the right rear of the trailer.
only be activated with continuous compression of the
button. Releasing the button will stop the reel.
Should this switch become defective, only replace with
an approved Rangeward Inc. switch.
/Users/helix/MediaMorphosis/_RangeWard/Documentation/Manuals/Power Grazer Trailer Manual v9.docx
N:\S_Wp\Setups\Normal\Normal.dot
Fence Retrieval
The switch can
When retrieving the rope use one hand
to hold the safety reel button, use the
other hand to train the rope onto the
reel.
Notice - Use a tight fitting glove to
train the rope onto the reel. Be aware
of rope connections (four rope
connections have been made to make
one mile of rope) as they approach the
reel. Also beware of the Zammer
plastic handle secured to the end of
the rope as it approaches the reel.
The rope should have slight tension
when re-spooling. Assure the rope is
evenly dispersed across the reel.
29
Advertisement
Table of Contents
