Specifications - NEC MultiSync LCD2180WG-LED User Manual

Specifications

Monitor Specifications
LCD Module
Viewable Image Size: 54 cm/21.3 inches
Native Resolution (Pixel Count): 1600 x 1200
Input Signal
Display Colours
Synchronization Range Horizontal: 75 kHz
Viewing Angle Left/Right: ±88° (CR > 10)
Image Formation Time
Resolutions Supported
Active Landscape: Horiz.: 432 mm/17.0 inches
Display Area
Power Supply
Current Rating
Dimensions Landscape: 473 mm (W) x 461.7 mm (H) x 211.9 mm (D)
Weight
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Storage Temperature: -10°C to 60°C/14°F to 140°F
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
SpectraView LCD2180
WideGamut LED Monitor
Diagonal: 54 cm/21.3 inches
Video: Digital Input
16,777,216
Vertical: 60 Hz
Up/Down: ±88° (CR > 10)
20 ms (Typ.)
1600 x 1200 at 60 Hz
Vert.: 324 mm/12.8 inches
AC 100-240 V ~ 50/60 Hz
1.1 - 0.5 A
18.6 inches (W) x 18.2 inches (H) x 8.3 inches (D)
18.3 kg (40.3 lbs)
Humidity: 30% to 80%
Feet: 0 to 12,000 Feet/0 to 3,658 m
Humidity: 10% to 85%
Feet: 0 to 40,000 Feet/0 to 12,192 m
Notes
Active matrix; thin film transistor (TFT) liquid
crystal display (LCD); 0.270 mm dot pitch;
200 cd/m
typical.
DVI
Depends on display card used.
English-10
1-12
2
white luminence; 430:1 contrast ratio,