NEC MultiSync LCD2180WG-LED User Manual page 16

Tag5 Video Bit Depth
Video Detect
Off Timer
Language
OSM Left/Right
OSM Down/Up
OSM Turn off
OSM Lock Out
Resolution Notifier
LED Brightness
ColorComp
Factory Preset
Selects the Input bit (10 bit or 8 bit). 10 bit input needs to connect the input2 with
DVI Dual link.
Selects the method of video detection when more than one computer is connected.
Press "+" or "-" to select.
FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode. When
current video input signal is not present, then the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically. The
monitor will not look for other video signals while the current video source is present.
LAST DETECT: The video input has to be switched to the "LAST DETECT" mode. When
the monitor is displaying a signal from the current source and a new secondary source is
supplied to the monitor, then the monitor will automatically switch to the new video source.
When current video input signal is not present, then the monitor searches for a video
signal from the other video input port. If the video signal is present in the other port, then
the monitor switches the video source input port to the new found video source
automatically.
NONE: The Monitor will not search the other video input port unless the monitor is
turned on.
Monitor will automatically power-down when the end user has selected a pre-determined
amount of time.
OSM control menus are available in seven languages. Press "+" or "-" to select.
You can choose where you would like the OSM control image to appear on your screen.
Selecting OSM Location allows you to manually adjust the position of the OSM control
menu left or right.
You can choose where you would like the OSM control image to appear on your screen.
Selecting OSM Location allows you to manually adjust the position of the OSM control
menu down or up.
The OSM control menu will stay on as long as it is in use. In the OSM Turn Off submenu,
you can select how long the monitor waits after the last touch of a button to close the
OSM control menu. The preset choices are 10-120 seconds by 5 seconds step.
Press "+" or "-" to select.
This control completely locks out access to all OSM control functions. When attempting to
activate OSM controls while in the Lock Out mode, a screen will appear indicating the
OSM controls are locked out. There are two types of OSM LOCK OUT:
OSM LOCK OUT with BRIGHTNESS control: To activate the OSM Lock Out function,
press SELECT, then "+" key and hold down simultaneously. To deactivate the OSM Lock
Out, press SELECT, then "+" key and hold down simultaneously. BRIGHTNESS can be
adjusted while in the lock out mode.
OSM LOCK OUT with no control: To activate the OSM Lock Out function, press SELECT,
then ">" key and hold down simultaneously. To deactivate the OSM Lock Out, press
SELECT, then ">" key and hold down simultaneously. No controls can be adjusted while in
the lock out mode.
The optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not set to 1600 x 1200.
Press "+" or "-" to select.
Controls the brightness of the LED on the display, "OFF", "MID" and "MAX".
This function compensates for slight deviations in the white uniformity of the screen that
may occur. This function improves the colour and smoothens the luminance uniformity of
the display, however, this function does reduce the overall peak luminance of the screen.
If greater luminance is desired over the uniform performance of the display, then this
function should be turned off.
Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,
IMAGE CONTROLS, COLOUR CONTROL SYSTEM, OFF TIMER, OSM LEFT/RIGHT,
OSM DOWN/UP, OSM TURN OFF, DISPLAY MODE) back to the factory settings.
Highlighting the control to be reset and pressing the RESET button can reset individual
settings.
Press "SELECT" to reset.
English-14
1-16