NEC MultiSync LCD1990SXi Brochure & Specs page 2

Unparalleled display performance for your
Designed for professionals with color critical
applications, the SpectraView Color Calibration
II
Solution combines award-winning NEC Display
Solutions LCD monitor technology with a color
measurement sensor and sophisticated software.
The result is a highly accurate, reliable, repeat-
able and feature-rich display calibration and
profiling solution.
SpectraView Color Calibration Solution Features and Benefits
II
10-/12-bit internal look-up tables (LUTs) - Each LCD monitor sup-
ported by SpectraView features three internal 10-bit LUTs. These
II
tables allow very precise adjustments to be made to the display's
tone response curve with minimal reduction to the number of
displayable colors.
Display Data Channel Command Interface (DDC/CI) - SpectraView
communicates with the monitors using DDC/CI, which is a two-way
communications link between the video graphics adapter and
display monitor using the normal video signal cable. No extra cables
are necessary. All adjustments to the monitor settings are done
automatically using this communications link.
Multiple calibration sets - Different monitor calibrations can
be instantly loaded, allowing quick and easy switching between
different calibration settings without the need to re-calibrate the
display. Each time a calibration set is loaded, the necessary monitor
settings and ICC/ColorSync profiles are automatically updated.
Calibrated display information - At the end of each monitor cali-
bration, an information window is displayed, which shows the results
of the calibration and includes a wealth of information about the
display such as the measured color gamut, grayscale color tracking,
Delta-E and luminance values. Additional information about the dis-
play monitor such as the model name, serial number and the total
number of hours that it has been in use are also displayed.
Calibration status validation - SpectraView
brated monitor to see if any controls have changed since the last
calibration. If anything has changed, the previous calibrated state
can be restored automatically.
COLOR-CRITICAL
Quick and easy measurements. The SpectraView
system uses the iOne Display 2, a custom, co-
branded colorimeter from GretagMacbeth, to take
color measurements of the display screen during
calibration. The software analyzes these measure-
ments and sends color adjustment commands
directly to the display monitor. This means that
color adjustments are made in the monitor rather
II
will query each cali-
II
applications.
than in the video graphics adapter, resulting in
II
full use of the number of colors available on the
graphics adapter and a much brighter image with
the maximum possible color gamut. With Spectra-
View , the video graphics adapter is not used at all
II
to make any gamma or tone response curve cor-
rections to the display, so the full color resolution
and fidelity of the system is maintained.
Application flexibility - SpectraView
options that make it flexible enough to be used in a large variety of
applications, including full DICOM support for medical imaging. The
display luminance can be adjusted to either a specific value or to
the maximum possible that the display can achieve. In addition,
custom target response curves can be created in addition to pre-
sets such as L* and SMPTE.
Network support (Windows only) - SpectraView
the NEC NaViSet TM Administrator network software (available sepa-
rately from your NEC representative) to provide remote network
access and monitoring of display monitors. NaViSet Administrator
is able to read, display and log the current calibration settings
and status of displays on an existing network (LAN). This feature is
particularly useful for large installations where central monitoring
and asset management is needed.
Monitor locking - Once calibrated, the On Screen Manager (OSM)
controls for the display monitors can be locked to prevent acciden-
tal or unauthorized adjustment, which may invalidate the calibrated
state of the monitor.
Monitor profiling - After calibration, the display is automatically
profiled and highly accurate ICC/ColorSync color profiles are gener-
ated and automatically registered with the color management
system. These profiles use the Bradford Chromaticity Adaptation
matrix.
Colorimeter function - The software features a colorimeter func-
tion, which allows direct measurements to be taken by the color
sensor and the results displayed in a variety of different formats.
provides many features and
II
integrates with
II