Controls - NEC MultiSync LCD1980SX User Manual

Controls

OSM ® (On-Screen Manager) control buttons on the front of the
monitor function as follows:
To access OSM menu, press any of the control buttons (
To change signal input, press the SELECT button.
NOTE: OSM must be closed in order to change signal input.
EXIT
CONTROL /
–/+
ADJUST
SELECT
RESET
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the RESET function by pressing the EXIT button.
Brightness/Contrast Controls
BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
AUTO BRIGHTNESS
This function adjusts the brightness automatically for the best BRIGHTNESS setting
based on the white display area.
Auto Adjust (Analog input only)
Automatically adjusts the Image Position and H. Size (or V.Size) settings and Fine settings.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE (OSM Rotation: Landscape) or V.Size (OSM Rotation: Portrait)
(Analog input only)
Adjusts the horizontal (or vertical) size by increasing or decreasing this
setting. If the "AUTO Adjust function" does not give you a satisfactory picture
setting, further tuning can be performed manually using the "H.Size (or
V.Size)" function (dot clock). For this a Moiré test pattern could be used. This
function may alter the width of the picture.
Menu
Exits the OSM controls.
Exits to the OSM main menu.
Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
Moves the bar left/right to increase or decrease the adjustment.
Activates the selected function and enters the OSM and OSM
sub menu controls. Input selection can be made with OSM off.
Resets the highlighted control menu to the factory setting.
8
, , –, +).