VDO AS47-G CS Installation Manual page 41

12. FAQ / Support
12. FAQ / Support
GPS repeater does not work – no signal reception
Please check if the power supply is connected to the black transmitter unit and if the red LED lights up. Also
check that the coaxial cable is correctly connected to the external antenna and has no bending.
.
GPS receiver in the vehicle receives no signal – signal availability in the building
Please check the correct construction of the system, i.e. that the receiving antenna has a position with a clear
view to the sky and that the transmitting unit is installed at a distance not greater than 7-8m from the GPS
antenna in the vehicle. Check with a GPS-enabled smartphone whether GPS reception is available at the
parking position of the vehicle. If your GPS tachograph is around the dashboard, please ensure that the
transmitter unit is correctly aligned and that it is within sight of the tachograph.
Please note that the transmitting antenna or the repeater should not be in direct visual contact with the external
antenna due to possible interference!
Notes:
.............................................................................................................
.............................................................................................................
.............................................................................................................
.............................................................................................................
.............................................................................................................
109
GNSS Repeater Buch 1.indb 109 18.01.2019 16:06:18