Setting Up; Setting Up With Satron Voadvisor Service Software; Setting Up With Local Switches - satron VO Instruction Manual

SATRON VO
Installation and Setting-Up Instructions Manual

2. SETTING UP

2.1 Setting‑up with Satron VoAdvisor Service Software
When you want to have all the operations of the Smart transmitter, we recommend the use of Satron VoAd‑
visor Service Software program. Satron Instruments Inc. will deliver you the program and HART‑modem.
2.2 Setting‑up with local switches
The additional instruction of display menus is enclosed to this manual. See chapter 3
Housing with display, code N
Keyboard :
Esc = Press Esc move back towards the top of the main menu.
= Use the UP arrow key to move up on the current menu level or to increase
the selected parameter value.
= Use the DOWN arrow key to move down on the current menu level or to
decrease the selected parameter value.
Enter = Press ENTER to move to a lower level in a menu or to accept a command or
parameter value
Satron Instruments Inc., FI-33960 Pirkkala, Finland
Tel. +358 207 464 800, www.satron.com
Figure 2‑2 VOadvisor software
17