Related Manuals for Bluevua RO100ROPOT-Lite-Bluevua
Summary of Contents for Bluevua RO100ROPOT-Lite-Bluevua
- Page 1 1-888-637-0009 (Mon-Fri 9:00-17:00 PST) https://www.bluevua.com support@bluevua.com https://twitter.com/Bluevua https://www.facebook.com/Bluevua https://www.instagram.com/bluevua/...
-
Page 2: Table Of Contents
Tap water often contains hundreds of toxic 2.1 Setting up ROPOT Lite chemicals that can cause numerous health problems. 3. Operation At Bluevua, we believe you deserve the best things in 3.1 Control Panel life, including easy access to clean water. Founded in 3.2 Filtering Water 2021, we aim to make hydration a simple, safe process. -
Page 3: Preparation
If All contents in this chapter are only for the correct use of this product. any part is broken or cracked, please contact Bluevua Support Team instead. Tel：1-888-637-0009 Mon-Fri 9:00 AM-5:00 PM PST Prohibition Email: support@bluevua.com... -
Page 4: Product & Accessories List
PREPARATION INSTALLATION 1.5 Product & Accessories List 2.1 Setting up ROPOT Lite 1. Wash the water tank and the glass carafe for the first time use. 2. Place the machine on a flat and stable surface, and make sure there are available power outlets nearby. -
Page 5: Operation
INSTALLATION OPERATION 3.1 Control Panel 6. Touch the Flush button to automatically flush water through the system. 7. Pour out the water left in the water tank and the carafe after completing a cycle. 8. Repeat steps 4 through 7 four times to flush out the protective liquid in the filter. Be Real Time Filtered Water aware that the water is NOT drinkable during the flushing process. -
Page 6: Filtering Water
OPERATION OPERATION Indicator Operating Status Display The filter life indicator reminds you when is the When the filter expires, the time to change the filter. When the filter expires, indicator repeatedly flashes the indicators must be reset to restart the filter until the replacement and life reminder after the filter replacement. -
Page 7: How Ropot Lite Works
OPERATION OPERATION 3.4 How ROPOT Lite Works 3.5 Making Fruit-infused Water 1. Rotate in counter-clockwise RO Reject Water Pure Water Screw Cap direction to remove the cap. Sliced Fruits Open High Borosilicate Glass Infuser Silicone Seal Lid Input Water 2. Rotate in clockwise direction to close the cap. -
Page 8: Reminders To Hydrate
4.2 Filter Replacement Steps Well done! You are all set! Find your FREE Bluevua Infused water recipes to hydrate yourself with new delicious ways! Flush 1. Remove the filter housing cover: 2. -
Page 9: Automatic Backflushing
MAINTENANCE MAINTENANCE 4.3 Automatic Backflushing The system automatically enters backflushing mode under the circumstances below: 1. When The Power Is On When the power is on, the system will automatically switch to backflushing mode and start backflushing for 30 seconds. Flush Flush 2. -
Page 10: How To Descale Your Ropot Lite
Limescale can clog up the machine and disrupt water flow. If you start experiencing All the Bluevua RO products have been through complete Quality Control slow water flow, it is time to take proper care of it. Use a commercial descaling solution (QC)inspection before being packaged. -
Page 11: Troubleshooting
TROUBLESHOOTING The system does not work after pressing the water-making button. Can I use the remaining water in the tank for the next filtration? Check Does the floating tablet in the water tank float up? NO, the remaining water in the water tank after a filtration cycle is NOT Take off the silicone sealing cap, then clean up the clogged floating unused or non-filtered water but the RO reject water that holds all the Solution... -
Page 12: Warranty
Refer back to the steps on page 12 and 13 to detach and re-insert the Solution Please scan the QR code above or visit website https://www.bluevua.com/warranty filter. Make sure the filter is fully inserted with no gap. for 1 year manufacturer warranty registration. Please also feel free to reach out to us if you have any questions or concerns about your RO drinking water system.
Need help?
Do you have a question about the RO100ROPOT-Lite-Bluevua and is the answer not in the manual?
Questions and answers
I have Bluevua Reverse Osmosis System Countertop RO100ROPOT-Lite. It is in Flash mode with it being the only button lit up. I already flashed 4-5 times, unplugged a couple of times, popped the filter out and back in, nothing seems to get it out of this mode. What do you recommend?
To resolve the Flash mode issue on the Bluevua Reverse Osmosis System Countertop RO100ROPOT-Lite, you should:
1. Check if the system has been unused for seven days or less.
2. If so, touch the Flush button to trigger manual backflushing.
3. Discard the filtered water from the first cycle.
This answer is automatically generated
@Mr. Anderson, 1. we use it regularly and getting fills every day. 2. As I mentioned in my original question, we flashed it 5-6 times already , accompanied by a few unplugging/pligging and popping the filter in and out. Even after 5-6 flashes, Flash is the only button, which is lit up and working. Original Amazon order placed January 19, 2024 Order # 114-3858849-7625011. Are you considering sending me a replacement? Thank you, Alex
@Mr. Anderson , will you respond? What are my options other than starting a case with Amazon, etc.?
I have Bluevua Reverse Osmosis System Countertop RO100ROPOT-Lite. It is in Flash mode with it being the only button lit up. I already flashed 4-5 times, unplugged a couple of times, popped the filter out and back in, nothing seems to get it out of this mode. Original Amazon order placed January 19, 2024 Order # 114-3858849-7625011. Are you considering sending me a replacement? Please no ridiculous canned responses from “Mr. Anderson”, get me a real person, who can read. Thank you, Alex
To resolve the Flash mode issue with the Bluevua Reverse Osmosis System Countertop RO100ROPOT-Lite, follow these checks and solutions:
1. Check if the water tank is stably placed on the base:
- Lift up the water tank and place it back properly onto the water tank base.
2. Check if the filter replacement cycle has passed:
- Look at the filter lifetime indicator. If the filter is expired, replace it according to the steps on pages 12 and 13 of the manual.
3. Check if the 4 cycles of flushing for a new filter have been completed:
- If not completed, finish the 4 flush cycles before using the system normally.
These steps should resolve the Flash mode issue.
This answer is automatically generated