Related Manuals for ARPACK AirClean AC 40
Summary of Contents for ARPACK AirClean AC 40
- Page 1 User manual AC 40 AIR PURIFICATION DEVICE (original issue) DE / The right to make changes is reserved! 1 | ARPACK GmbH...
- Page 2 Dear Customer! Please read this user manual carefully before using the ARPACK AirClean AC 40 device. 1. Intended purpose and recommendations on use The device is intended for disinfection (bactericidal and virucidal activity) and air purification from volatile organic compounds (odours) after their photocatalytic mineralisation on a nanocrystalline titanium dioxide affected by UV radiation in the wavelength range A (365 nm).
-
Page 3: Table Of Contents
Information on the device ■ Please read this document prior to commencing work. ■ Comply with the guidelines specified in this document. Otherwise, the warranty claim against ARPACK GmbH will expiry. 3.1 Document validity This document concerns the ARPACK AirClean air purification devices. -
Page 4: Safety
The AirClean AC 40 air purification device is intended for filtering or purification of normal air in rooms. The device is intended for internal installation in frost-resistant rooms. It is mainly intended for air purification in locations such as schools, kindergartens and nurseries,, but also in bedrooms, restaurants, waiting rooms, offices, halls, common rooms, etc. - Page 5 ■ Damaged structural elements must be replaced with original ARPACK spare parts. ■ Original ARPACK spare parts can be obtained within a short time via e-mail at service@arpack.com or via fax at 0049(30)80 95 200 - 28. It is forbidden for the user to make self-repairs.
- Page 6 4.5 Declaration of conformity Declaration of conformity (see chapter “12 Declaration of conformity) This product complies with the European directives and domestic requirements. 6 | ARPACK GmbH...
-
Page 7: Safety Guidelines
Safety guidelines 5.1 General information This manual only applies to the operation of the ARPACK AirClean AC 40 air purification device. The personnel appointed to perform appropriate work prior to start-up or maintenance must be acquainted with this manual. The guidelines specified in this manual must be observed. This manual must be kept in a readily available location as a component of the delivered device. - Page 8 HAZARD The device can only be operated in the efficiency range specified in the ARPACK technical documentation. The device can only be operated in a perfect technical condition. Defects and damage that affect or that may affect safety or the correct operation of the device must be promptly removed in a professional manner.
-
Page 9: Scope Of Delivery/Transport
Open the packaging and make sure that the device does not feature visible transport damage. The scope of delivery includes the following: - 1 ARPACK AirClean AC 40 air purification device - 1 wall mount + assembly material - 1 stand + assembly material - 1 user manual In case of any damage to the damage, notify the vendor immediately. -
Page 10: Functionality / Operation
UV-A diodes (Fig. 2). The pollutants, Power feeder bacteria and viruses are absorbed from the surfaces of photocatalytic elements and are mainly mineralised into carbon dioxide and water vapours due to the UV-A diodes’ light. Fuse Switch Fig. 2 Device presentation 10 | ARPACK GmbH... - Page 11 LED-UV-A emitter with a power feeder. The device’s operation is silent and the device does not require regular replacement of the photocatalytic elements, because they are not contaminated with dust particles during operation. 11 | ARPACK GmbH...
- Page 12 - Fix the wall mount (2) to the wall using the provided screws and dowels. - Screw the provided rubber legs (3) into the threaded openings in the device’s rear side. - Carefully hang the device on the wall mount and make sure that it is safely mounted. 12 | ARPACK GmbH...
- Page 13 During longer breaks in operation, the device must be placed in a location with minimum exposure to dust; prevent permeation of dust through the ventilation openings. Only qualified personnel can perform the device’s maintenance. Do not use acetone or liquids with acetone to wipe the device. 13 | ARPACK GmbH...
-
Page 14: Technical Data
Technical data Model Arpack AirClean AC 40 Parameters Values Maximum purification capacity in m approx. 20 Recommended maximum room size in m <28 Glass-based photocatalytic filter with TiO2 Complete mineralisation without accumulation of efficient organic airborne pollutants and pathogenic microflora on the photocatalytic filter Capacity to remove volatile organic compounds in mg/min approx. -
Page 15: Warranty
(with suitable packaging) and place it on an even, horizontal surface keeping the stand safe. It is especially important to prevent damage and negative impact caused by weather conditions (moisture, temperature, dust, dirtying) and external factors (impact, animals, rodents). The device’s openings must be tightly sealed. 15 | ARPACK GmbH... - Page 16 • The collection service is available via telephone at 0800/ 22 33 88 9 or via e-mail at: service@arpack.com Attention! We strive to protect the environment and to achieve sustainable development. Do not dispose of the device with household wastes. Send the device to the manufacturer, which covers the costs. 16 | ARPACK GmbH...
-
Page 17: Declaration Of Conformity
We hereby declare that the aforementioned product covered by this declaration complies with Appendix III of the EU Directive 2004/108/EC, i.e. with the current provisions of the aforementioned legal regulations in their latest edition. Berlin, 17.03.2021 Mark Arinstein Managing Director 17 | ARPACK GmbH... - Page 18 18 | ARPACK GmbH...
Need help?
Do you have a question about the AirClean AC 40 and is the answer not in the manual?
Questions and answers