NetScreen Technologies NetScreen-25 Getting Started Manual page 2

*HWWLQJ 6WDUWHG *XLGH
&21),*85,1* 7+( '(9,&(
8VH WKH ,QLWLDO &RQILJXUDWLRQ :L]DUG WR FRQILJXUH WKH 1HW6FUHHQ %HIRUH VWDUWLQJ
WKH :L]DUG GHFLGH KRZ \RX ZDQW WR GHSOR\ \RXU GHYLFH )RU DGGLWLRQDO LQIRUPDWLRQ
VHH WKH 1HW6FUHHQ 8VHU·V *XLGH
Trust Zone Interface IP Address. The default IP address and netmask
for the Trust zone interface is 192.168.1.1/24. You can change this
address to match IP addresses that exist on your network.
Assigning IP Addresses to Hosts in the Trust Zone (Enabling DHCP
Server). You can choose to have the NetScreen-25 assign IP
addresses, via DHCP, to hosts in your network. If you have the
NetScreen-25 assign IP addresses, then you can define the range of
addresses to be assigned. You need to ensure that the range of
addresses is in the same subnetwork as the Trust zone interface IP
address.
6WHS 
Launch a Web browser. In the URL address field, enter
http://192.168.1.1 or http://ns.setup. The Rapid Deployment
Wizard appears.
6WHS 
If your network uses NetScreen-Security Manager 2004, you can
use a Rapid Deployment (RD) configlet to automatically configure the
NetScreen-25. Obtain a configlet from your Security Manager
administrator, select the Yes option, click in the Load Configlet from:
field, browse to the file location, then click Next.
If you want to bypass the configuration wizard and go directly to the
WebUI, select the last option, then click Next.
If you are not using a configlet to configure the NetScreen-25 and
you want to use the configuration wizard, select the first option, then
click Next. The Initial Configuration Wizard welcome screen
appears.
Click Next.
6WHS 
Enter a new administrator login name and password, then
click Next.
6WHS 
Select the zones to which each interface is bound. Click Next.