Pioneer DDJ-SP1 Operating Instructions Manual page 6

Deck section
1 2 3
SLIP
SYNC
OFF
REL.
b
HOT CUE
a
HOT LOOP
LOOP ACTIVE
IN OUT
1 SYNC button
Press:
The tempos (pitches) and beat grids between tracks on multiple
decks can be synchronized automatically.
[SHIFT] + press:
Cancels the sync mode.
2 SLIP button
Press:
Turns the slip mode on and off.
[SHIFT] + press:
Sets Serato DJ to the relative mode.
3 CENSOR button
Press:
The track is played in the reverse direction while the [CENSOR] but-
ton is pressed, and normal playback resumes when the button is
released.
[SHIFT] + press:
Sets Serato DJ to the internal mode.
4 PARAM.1/PARAM.2 button
Press:
Sets a parameter for the loop roll, auto loop, slicer, manual loop and
sampler modes.
[SHIFT] + press:
Sets a different parameter for the auto loop, slicer and manual loop
modes.
= Using the performance pads (p.10)
5 AUTO LOOP control
Turn:
Selects the auto loop loop beat.
Press:
Turns the auto loop function on and off.
[SHIFT] + press:
Switches to the mode for using Serato Video.
6 SAMPLER mode button
Press:
Sets the sampler mode.
[SHIFT] + press:
Sets the sampler velocity mode.
= Using the sampler velocity mode (p.13)
6
En
4 4
AUTO LOOP
CENSOR PARAM.1
INT. PARAM.2
• BACK
— UTILITY
ROLL SLICER SAMPLER
AUTO LOOP MANUAL LOOP VELOCITY VIEW
SAVE SLOT
LOAD
RELOOP / EXIT SLOT
9
7 SLICER mode button
Press:
Sets the slicer mode.
! The mode switches between slicer mode 1 and slicer mode 2
each time the button is pressed.
PANEL SELECT
! To cancel the slicer mode, press one of the [ROLL] mode,
5
[SAMPLER] mode or [HOT CUE] mode buttons.
= Using the Slicer function (p.11)
6
LOAD
PREPARE
7
[SHIFT] + press:
AREA
Sets the manual loop mode.
LOAD
= Using manual loops (p.12)
SHIFT
8 SAMPLER VOLUME fader
SAMPLER VOL
Adjusts the sampler's overall sound level.
9 Performance pads
Used for hot cue, hot loop, loop roll, auto loop, slicer, manual loop
and sampler playback.
8
a ROLL mode button
Press:
Sets the roll mode.
[SHIFT] + press:
Sets the auto loop mode.
= Using auto loops (p.12)
b HOT CUE mode button
Press:
Sets the hot cue mode.
= Using hot cues (p.10)
[SHIFT] + press:
Sets the hot loop mode.
= Using hot loops (p.12)