Normal Operation - Sunfire SF120 Operation & Service Manual

Normal Operation:

This section will cover normal orientation and operation of the SunFire SF-120.
TO ADJUST THE TILT ANGLE:
Use the knobs on the sides of the unit to adjust the tilt angle of the dome face. Tighten the knobs when
adjustment is complete. Return the tilt angle to it's non-inclined position and tighten the
adjustment knobs for storage or transport of the unit.
TO OPERATE THE HANDLE:
The unit will ship with the handle secured in place by a hook and loop retaining strap (not shown). This should
be left on the frame and reused when transporting the heater in the future. To raise the handle position, undo
the retaining strap. Then, lift the handle until the spring-loaded pin engages (~90°), locking it in the raised
position.
To lower the handle position, pull the ring of the pin on the hinge to release and lower the handle.
Reuse the retaining strap to secure the handle in the lowered position when transporting
the heater.
RAISE THE HANDLE
When the heater is in use and connected to the power supply, it should never be moved, handled,
or refilled and no maintenance should be performed on it. Allow the unit to cool completely before
moving.
ADJUST TILT ANGLE
sunfireheaters.com
LOWER THE HANDLE
+1 (855) 251-1649
17