Table of Contents
Advertisement
Getting Started:
TO ASSEMBLE THE UNIT (CONT.):
8. With a 5/16" powered driver, use the visor screws provided to affix the dome visor to the top of the
dome face. Start at one end of the visor and move along the length of the visor to shape it to the
dome. Do not tighten the screws completely until all fasteners have been started, then go back and finish
securing all screws.
DO NOT operate the unit without the the dome guard and visor in place. These are important
safety components and are required.
9. [OPTIONAL] Assemble the lifting bracket and use a 7/16" wrench and a 1/2" wrench to secure it with
the bolt, washers, locking washers, and nuts provided in the packaging.
ASSEMBLE LIFTING BRACKET
16
ATTACH VISOR
The unit is now ready for normal operation.
sunfireheaters.com
ATTACH LIFTING BRACKET
+1 (855) 251-1649
Advertisement
Table of Contents
