Helpful Hints - KitchenAid KFP0923 Owner's Manual

TIPS FOR GREAT RESULTS

HELPFUL HINTS

• To avoid damage to the blade or motor,
do not process food that is so hard or
firmly frozen that it cannot be pierced
with the tip of a sharp knife. If a piece
of hard food, such as a carrot, becomes
wedged or stuck on the blade, stop the
processor and remove the blade. Gently
remove food from the blade.
• Do not overfill Work Bowl. For thin
mixtures, fill Work Bowl up to
1/2 -2/3 full. For thicker mixtures, fill
Work Bowl up to 3/4 full. For liquids,
the Work Bowl should be no more than
2/3 full. When chopping, the Work Bowl
should be no more than 1/3 -1/2 full.
• Position Slicing/Shredding Disc so the
cutting surface is just to the right of the
feed tube. This allows the blade a full
rotation before contacting the food.
• To capitalize on the speed of the
processor, drop ingredients to be
chopped through the feed tube while
the processor is running.
• Different foods require varying degrees
of pressure for best shredding and slicing
results. In general, use light pressure
for soft, delicate foods (strawberries,
tomatoes, etc.), moderate pressure for
medium foods (zucchini, potatoes, etc.),
and firmer pressure for harder foods
(carrots, apples, hard cheeses, partially
frozen meats, etc.).
• Soft and medium-hard cheese may
spread out or roll up on the Shredding
Disc. To avoid this, shred only well-
chilled cheese.
• Sometimes slender foods, such as carrots
or celery, fall over in the feed tube,
resulting in an uneven slice. To minimize
this, cut food in several pieces and pack
the feed tube with the
food. For processing
small or slender items,
the small feed tube
in the 2-piece Food
Pusher will prove
especially convenient.
• When preparing a cake
or cookie batter or
quick bread, use the
multipurpose blade to
cream fat and sugar
14
W11598979A.indb 14 W11598979A.indb 14
first. Add dry ingredients last. Place
nuts and fruit on top of flour mixture
to prevent over-chopping. Process
nuts and fruits, using short pulses, until
blended with other ingredients. Do not
overprocess.
• When shredded or sliced food piles
up on one side of the Bowl, stop the
processor and redistribute the food
using a spatula.
• When food quantity reaches the bottom
of the Slicing/Shredding Disc, remove
the food.
• A few larger pieces of food may
remain on top of the Disc after slicing
or shredding. If desired, cut these by
hand and add to mixture.
• Use the spatula to remove ingredients
from the Work Bowl.
• Organize processing tasks to minimize
Bowl cleanup. Process dry or firm
ingredients before liquid ingredients.
• To clean ingredients from the
Multipurpose Four Blade easily, just
empty the Work Bowl, replace the lid,
and pulse 1-2 seconds to spin the blade
clean.
• After removing the Work Bowl cover,
place it upside down on the counter.
This will help keep the counter clean.
• Your Food Processor is not designed
to perform the following functions:
- Grind coffee beans, grains, or
hard spices
- Grind bones or other inedible
parts of food
- Liquefy raw fruits or vegetables
- Slice hard-cooked eggs or room-
temperature meats.
• If any plastic parts should discolor due
to the types of food processed, clean
them with lemon juice.
4/12/2022 6:14:21 PM 4/12/2022 6:14:21 PM