Bluetooth Setup - Denver BTS-50 Instruction Manual

Bluetooth Setup

Pairing a Bluetooth Device
1. Make sure you have first followed the instructions for Pairing the Speakers.
When pairing, the device should remain within 3 feet of the speakers.
2. Press the Pair button on ONLY one of the speakers. The pair
indicator will begin flash quickly.
Using the native controls on your Bluetooth device, select the " "BTS-50" in your
Bluetooth settings to pair.
If your device requests a password, enter the default password " "0000".
Refer to the use' s manual for your specific device for instructions on pairing and
connecting Bluetooth devices.
3. When successfully paired, the pairing indicator will stop flashing and remain
solid.
After initial pairing, the unit will stay paired unless unpaired manually by the
user or erased due to a reset of the device.
If your device should become unpaired, follow the above steps again.
If any pairing issues should occur, un-pair the unit on your Bluetooth device
and follow the above steps again.
Note : If two speakers with the BTS-50 name appear on the pairing list of your
device, please erase one of BTS-50 listed in your Bluetooth device and repeat
the above steps again.
4. The AC/DC power adaptor will be off function automatically when the music
disconnect within 5 minutes. It needs pair again.
Playing Audio Wirelessly
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on them connected Bluetooth Device to select a track.
3. To play, pause or skip the selected track, use the native controls on the
connected Bluetooth Device.
4. Any audio played through the connected Bluetooth device will now be heard
through the speakers.
4