Table of Contents
Advertisement
Installation
Two threaded sleeves for M4 screws are provided for mounting the antenna. These are
designed in the standard VESA dimensions 100 x 100 mm so that a VESA standard holder or
the SIMATIC RF600 antenna holder 3-way kit can be used.
The antenna is suitable for mounting on metallic and non-metallic surfaces.
Note
Achieving optimum wave propagation
To achieve optimum wave propagation, the antenna should not be surrounded by
conducting objects. The area between antenna and transponder should also allow wave
propagation without interference.
Note
Conditions relating to UL approval
• The product is designed exclusively for use in industrial environments.
• For indoor use only (dry location)
• Coaxial connectors and cables shall comply with NFPA70 art. 820 part V
Antenna holders
The Siemens antenna holder allows fine adjustment of the antenna field by setting the solid
angle.
SIMATIC RF662A
Operating Instructions, 12/2022, C79000-G8976-C684-01
3
9
Advertisement
Table of Contents
