Summary of Contents for Money Controls Condor Plus
Page 1
Issue 1.1 – June 2004 This document is the copyright of Money Controls Ltd and may not be reproduced in part or in total by any means, electronic or otherwise, without the written permission of Money Controls Ltd. Money Controls Ltd does not accept liability for any errors or omissions contained within this document.
Page 4
TSP081 Issue 1.1 – June 2004 Introduction The Toolkit is designed to interface to the Condor Plus coin acceptor and enable the following features:- The ccTalk interface is the single connection between the Condor Plus and the toolkit. Power should be applied to the mech after the connection to the toolkit has been made.
Page 6
TSP081 Issue 1.1 – June 2004 Coin Enable 1. To specify the coin to be enabled, turn the Condor Plus rotary switch to the position of the specific coin to be enabled. (see Figure Figure 4: Rotary Switch v Coin Windows 2.
Page 7
This manual is intended only to assist the reader in the use of this product and therefore Money Controls shall not be liable for any loss or damage whatsoever arising form the use of any information or particulars in, or any incorrect use of the product.
Need help?
Do you have a question about the Condor Plus and is the answer not in the manual?
Questions and answers