Table of Contents
Advertisement
Assembly
1
Assembling the fountain body
□
Select a flat, level surface for the fountain location.
□
Unfold the metal base, and adjust the four legs to
90 degree angles. Then, turn the top screw (1a)
counterclockwise and the bottom screw (1)
clockwise to lock the legs in place.
□
Position the glass basin (B) over the metal base (A).
Ensure the glass basin is level.
Attaching the pump and
2
metal top
□
Put the pump (C) into the glass basin (B)
horizontally, and draw out the pump power cord from
the edge of the glass basin and keep it opposite of
the operator.
□
Pull of the clips with suction cup (2) to a 45 degree
angle, then position the metal top (D) over the glass
basin (B) to clip the edge of the glass basin (B).
Insert the water supply tube (3) into the pump outlet
that is on the top of the pump. Slightly dampen the
surface of suction cups (2) and press them onto the
bottom of the glass to ensure that they stick on the
glass tightly.
□
Add clean water into the glass basin (B). The
required water volume is 4.5 liters (1.19 gallons)
or the water level should be approximately 0.8 in.
/20 mm lower than the edge of the glass basin.
5
Advertisement
Table of Contents
