Summary of Contents for HAMPTON BAY OLYMPUS 2 10141
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this 2-tier fountain. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement...
Table of Contents Table of Contents ............2 Assembly ............... 5 Safety Information ............2 Operation ............... 8 Pre-Assembly ..............3 Maintenance ..............8 Planning for Successful Assembly ...........3 Care and Cleaning ............8 ...
Pre-Assembly PLANNING FOR SUCCESSFUL ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non- abrasive surface such as carpet or cardboard. Place the fountain near an outdoor GFCI (Ground Fault Circuit Interrupter) electrical connection. IMPORTANT: Do not place the fountain on or near any surface that can be damaged by water.
Assembly Connecting the base and the large Installing the pump bowl □ □ Place the pump (F) in the center of the large bowl (B). Insert the bottom of the large bowl (B) into the base (A) □ and lock the parts together. Insert the electrical cord on the pump (F) through the large bowl (B) and into the base (A).
Page 6
Assembly (continued) Connecting the small bowl and Installing the finial small base to the large bowl □ □ Insert the small base (C) into the large bowl (B) and lock the Thread the hose of the finial (E) into the small bowl (D), parts together.
Page 7
Assembly (continued) Attaching the back cover Adding water □ □ Assemble the back cover (G) to the back of the small base Add water to the large bowl (B). Fill within 2 inches below (C). the rim of the large bowl (B). □...
Operation Turning on the pump □ Plug the electrical cord of the pump (F) into a power outlet. □ After a few moments, water starts to flow. NOTE: You must use a GFCI outlet. Maintenance □ To reduce the risk of electrical shock, always disconnect the power supply before working with the fountain. □...
Troubleshooting Problem Possible Cause Solution □ No water comes out. The hose is bent or Disconnect the power supply and check for a bent or crushed hose. crushed. □ There is not enough water Verify the water level in the fountain and add more if it is not adequately filled. in the fountain.
Page 11
This page intentionally left blank HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
Page 12
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use.