Table of Contents
Advertisement
Quick Links
Item # 210-272
Model # 10856
USE AND CARE GUIDE
ROCK FOUNTAIN-OASIS
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this rock fountain-oasis. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Advertisement
Table of Contents
Related Manuals for HAMPTON BAY 10856
Summary of Contents for HAMPTON BAY 10856
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this rock fountain-oasis. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ............2 Assembly ............... 5 Safety Information ............2 Operation ............... 7 Pre-Assembly ..............3 Maintenance ..............7 Planning for Successful Assembly ...........3 Care and Cleaning ............7 ... -
Page 3: Pre-Assembly
Pre-Assembly PLANNING FOR SUCCESSFUL ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non- abrasive surface such as carpet or cardboard. Place the fountain near an outdoor GFCI (Ground Fault Circuit Interrupter) electrical connection. IMPORTANT: Do not place the fountain on or near any surface that can be damaged by water. -
Page 4: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Base Pump Pump cover... -
Page 5: Assembly
Assembly Installing the pump Attaching the pump cover □ □ Place the pump (B) in the base (A). Assemble the pump cover (D) to the fountain back. □ □ Position the electrical cord through the groove on the back Close the pump cover (D). of the base (A). - Page 6 Assembly (continued) Connecting the top on the base Adding water and the hose to the pump □ Add water to the base (A). Fill within 1-2 inches below the NOTE: Two people are required in order to complete this rim of the base (A). step.
-
Page 7: Operation
Operation Turning on the pump □ Plug the electrical cord of the pump (B) into a power outlet. □ After a few moments, water starts to flow. NOTE: You must use a GFCI outlet. Maintenance □ To reduce the risk of electrical shock, always disconnect the power supply before working with the fountain. □... -
Page 8: Troubleshooting
Troubleshooting Problem Possible Cause Solution □ No water comes out. The hose is bent or Disconnect the power supply and check for a bent or crushed hose. crushed. □ There is not enough water Verify the water level in the fountain and add more if it is not adequately filled. in the fountain. - Page 9 This page intentionally left blank HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
- Page 10 This page intentionally left blank...
- Page 11 This page intentionally left blank HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance.
- Page 12 Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use.