•STEP 4c (bullet cameras with internal screws)
To access camera controls, open camera door (A) and adjust lens, focus and zoom. Use a suitable screwdriver to adjust
focus and zoom screws. Use the trimmer indicated by the arrow to adjust camera IR level (C).
:
A
!!! PAY THE UTMOST ATTENTION WHEN ADJUSTING CAMERA LENS, ZOOM and FOCUS !!!
Place the Silica Gel packet inside the door (See chapter 4.4 on page 19).
•STEP 5
When using BACKBOX and flange optional accessories (A) to mount bullet cameras: install the accessories as illustrated
in the image below (B).
B
B
A
Quick Guide - Telecamere AHD Full HD - 090010937
18
C