Sollevatore magnetico a comando manuale MaxX + ATS
Hand-operated magnetic lifter MaxX+ATS
BEFORE USING THE MAXX ATS LIFTER
The magnetic lifter MaxX ATS presents a dedicated slot for the batteries
package, required for ATS device and its digital display activation. The device is
powered with 6 AA batteries NiMH 1.5 V 1500 mAh. .(see figure 1) To insert the
batteries, unscrew the cap by turning counterclockwise as shown above (we
recommend to use a tool such as model USAG 281C/160 insert Ø 3).(see fig 2)
Pull-out the battery housing that is located inside the slot and insert into it the 6
AA batteries.(see figure 3)
Insert the battery housing following the direction of the arrow (see picture below)
and the correct insertion way reproduced on the front lid. The two contacts (+/-)
must be oriented to the slot and the single contact close to the closing lid.
Fig. 1
Fig.2
Fig.3
Pagina
Rev. 16 febbr.2010
20
bp