Wearing/Remove Hearing Aid; Turn On/Turn Off - MedeScan JH-908 Instruction Manual

3.【WEARING/REMOVE HEARING AID】
Notes: For comfort, always turn off your hearing aids before you
wear or remove them.
3.1 Wearing hearing aid
Step 1: Hold the hearing aid body (hard part), place in the ear
(Make sure it is in right direction like picture).
Step 2: Move the body slightly into auricle for holding.
1
3.2 Removing the hearing aid
Step 1: Grasp the protruding hearing aid and remove it.
2
-11-
*Note:
1.It may be in few circumstances that the ear dome remain
attached to the auditory meatus after the hearing aid is taken out.
In that case, please ask a professional doctor to take the ear dome
out.
2. Before the hearing aid is appropriately secured, it may give out
the creak sound, which is a normal phenomenon. The creak sound
can be used as a reference to determine whether the hearing aid is
secured. If the hearing aid gives out squeaking, please check if it is
taken on correctly; if so, but the squeaking remains, please replace
with the other set of ear dome. When the hearing aid is not in use,
please turn it off without delay.
3. When the hearing aid is not functioning properly, please check
the "Troubleshooting Guide". If none of the solutions work, please
contact our after-sales service team.
4.【TURN ON/TURN OFF】
Turn On: Long press the "Multi-function button" for three (3)
seconds and the hearing aid will be power ON with the prompt tone
of " Beep ".
Turn Off: Long press the "Multi-function button" for three (3)
seconds and the hearing aid will be power OFF with the prompt
tone of " Beep ".
-12-